BCD605 DC Battery Charger
  • BCD605
  • BCD605 Side
  • BCD605 Side
NSN# BCD605
BENEFITS
  • Ultra-quiet
  • Power sensitive electronics without interference
  • Rugged and reliable
  • Ensure years of safe and trouble free operation
  • Fast and accurate charging
Electrical [Input]
Model Number BCD605-12-12 BCD605-12-24
Input Volts (DC) 10.5-14 10.5-28
Input Amps (Max) 50
Input Fuse (AGC) 30A x 2
Noise on Input < 50 mV
Low Input Voltage Alarm 10.5V
Electrical [Output]
Output Nominal (op) 12 24
Output Volts (DC) 13.6 ± 0.05 27.2 ± 0.05
Charging Current (Amps) * 40 * 20
Output Adjustment ± 0.5
Absorption to Float 6.0Amps 3.3Amps
Output Adjustment(Vdc) ± 1.0V
Output Crowbar 16.0 ± 0.5V 32.0 ± 1.0V
Output Ripple & Noise < 50 mV
Battery Banks 1
Stage 2
Battery Size (Amp Hours) 160-240 80-120
Regulation
(Line & Load)
< +/- 0.5%
Duty Cycle Continuous 100% for 24 hours per day
Efficiency > 90% @ Maximum Output

* The Actual charging rate depends upon the input/output voltage ratio.
To obtain the charging capability at any given input voltage, use the following formula:
Charging Current = Input Volts/Output Volts x 40
For example, at 11 VDC in and 13.6 VDC out,
the charging current = 11.5/13.6 x 40 = 33.8 amps

Environmental Specification
Operating Temp. Range -25° to +40°C @ maximum output
Derate Linearly 2.5% per°C from 40°C
(Optional -40°C extra wide temp. operation avail.)
Humidity 0 - 95% Relative Humidity
(non-condensing) with optional conformal coating
Audible Noise NONE - Ødb @ 3 ft
Typical Service Life >10 years (87,600 hours)
Isolation Any Input or Output to Case 500 VDC
Input to Output – Common Negative)
Mechanical Specification
Length 9.1 in / 23.1 cm
Width 7.8 in / 19.8 cm
Height 4.3 in / 10.8 cm
Clearance 1 inch (2.5 cm) all around
Material Marine Grade Aluminium
Finish Black Anodize / Powder Epoxy Coat
Fastenings All 18-8 Stainless Steel
Weight 6.0 lb / 2.7 kg
Connections Four contact output terminals
Warranty 3 years
Safety Designed to meet CSA 22.2.107.1 & UL458