IVS500 Series Pure Sinewave DC / AC Inverters
  • front view
  • Ultra-Quiet
  • Power sensitive electronics without interference
  • Rugged & Reliable
  • Ensure years of safe and trouble free operation
Electrical [Input/Output]/ Mechanical Specification
Input Voltage 24V, 36V, 48V, 125VDC, 250VDC +/-15% are standard
Other inputs available, please consult factory
Input Protection Thermal fuse, Inrush current limiting, Reverse polarity protection,
Varistors, Lower voltage than specified input min. will not damage unit
Isolation Input to chassis 1000VDC for < 60V input
Output Voltage 115VAC/60Hz or 400Hz @4.34A
230V/50Hz @2.17A continuous with grounded neutral
Isolated floating output optional (Consult factory for other voltages and frequencies)
Wave Form Sinusoidal
Total Harmonic Distortion Less than 5% at full load
Efficiency Min. 78% at full load
Line Regulation Max. 0.5%
Load Regulation Max. ± 6% from no load to full load
Output Protection Current limiting with short circuit protection, thermal shutdown with
automatic recovery in case of continuous overload or insufficient cooling
Output Overvoltage Protection 140/280 V by internal supply voltage limiting
EMI Meets EN 55022 Class A as a minimum
Load Crest Factor Maximum 3.0 at 90% load
Output Noise High frequency ripple is better than 500m Vrms (20MHzBW)
Operating Temperature Range 0 °C to +50°C
Humidity 5 - 95% non-condensing
Temperature Drift 0.05% per °C over operating temperature range
Cooling Built-in fan
Environmental Protection Basic ruggedizing
Dimensions 5” x 5.2” x 15.5” (W x H x L) including terminal block and flanges
Connections Input: Compression-type terminal / Output: Standard AC receptacle
Weight 9.0 lb (4.2 kg)
Safety Compliance to C22.2 No. 107.1 - 01 and UL 458 and EN60950
Options Output Fail Alarm (Form C)
Remote Inhibit: By closing external contacts on the inhibit terminals
Warranty: Twenty-Four months subject to application within good engineering practice
Enhancements to these general specifications can be accommodated upon request
Designed to meet common approval requirements. Specifications Subject to Change Without Notice
Designed and Manufactured in Canada