DC Battery Chargers
Analytic Systems Step-Up & Step-Down DC Source Chargers and Equalizers provide up to 600 watts to charge a 12V or 24 V battery systems (1 or 2 banks) from a 12, 24, 32 or 36 volt source. The source and the batteries under charge must share a common ground. Their all-new, single board design incorporates state of the art switch mode technology for unmatched efficiency and ultra-quiet operation. Multiple stages of filtering reduce radiated or conducted noise to very low levels. All Series are capable of charging up to two independent banks of batteries.
Analytic Systems High-Voltage Isolated DC Source Chargers charge either, 12, 24 or 48 volt batteries from a 72, 110, 220 or 300 VDC power source. Other battery voltages, up to 650 volts are also available by special order. The all-new Current Mode Switching Design offers increased power and reliability in a compact package. Extra input and output filtering reduce EMI to extremely low levels. Reliability features include: an input fuse, thermal shutdown, current limiting, reverse battery hookup protection, output short circuit shutdown with automatic recovery and an equalizing charging cycle. The output voltage is easily adjusted 0.5 volts above or below the standard output voltage to accommodate special charging requirements.
Toll Free: 1-800-668-3884
Tel: 604.946.9981
Fax: 604.946.9983
Email Us
Facebook/Twitter/LinkedIn:
| BCD300 | Input Voltage (VDC) |
Output Voltage (VDC) |
Output Amps (Cont.) |
Part Number | Data Sheets |
|---|---|---|---|---|---|
![]() |
20-45V | 12V | 25A | BCD300-32-12 |
![]()
|
| 30-45V | 24V | 20A | BCD300-32-24 | ||
| BCD301 | Input Voltage (VDC) |
Output Voltage (VDC) |
Output Amps (Cont.) |
Part Number | Data Sheets |
|---|---|---|---|---|---|
![]() |
20-30V | Input Volts/2 | 25A | BCD301-24-12 |
![]()
|
| BCD305 | Input Voltage (VDC) |
Output Voltage (VDC) |
Output Amps (Cont.) |
Part Number | Data Sheets |
|---|---|---|---|---|---|
![]() |
10.5-14V | 12V | 17-27A | BCD305-12-12 |
![]()
|
| 10.5-28V | 24V | 10-27A | BCD305-12-24 | ||
| BCD600 | Input Voltage (VDC) |
Output Voltage (VDC) |
Output Amps (Cont.) |
Part Number | Data Sheets |
|---|---|---|---|---|---|
![]() |
20-45V | 12V | 50A | BCD600-32-12 |
![]()
|
| 30-45V | 24V | 38A | BCD600-32-24 | ||
| BCD601 | Input Voltage (VAC) |
Output Voltage (VDC) |
Output Amps (Cont.) |
Part Number | Data Sheets |
|---|---|---|---|---|---|
![]() |
20-30V | Input Volts/2 | 50A | BCD601-24-12 |
![]()
|
| BCD605 | Input Voltage (VAC) |
Output Voltage (VDC) |
Output Amps (Cont.) |
Part Number | Data Sheets |
|---|---|---|---|---|---|
![]() |
10.5-14V | 12V | 17-45A | BCD605-12-12 |
![]()
|
| 10.5-28V | 24V | 17-45A | BCD605-12-24 | ||
| BCD800 | Input Voltage (VDC) |
Output Voltage (VDC) |
Output Amps (Cont.) |
Part Number | Data Sheets |
|---|---|---|---|---|---|
![]() |
10.5-14V | 12V | 60A | BCD800-12-12 |
![]()
|
| 24V | 30A | BCD800-12-24 | |||
| 10.5-28V | 12V | 60A | BCD800-24-12 | ||
| 24V | 30A | BCD800-24-24 |
| RCP1-BCL | Remote Control Panel (BCD300-BCD1015) |
|---|---|
| DVAM | Output Digital Volt/Ammeter |
| EQUALIZE | Equalize and Temperature Compensation / 2nd Battery Temp. Sensor |
| RACK | 19" Rackmount w/ Digital Volt/Ammeter (BCD610-1000 & BCD615-1015) |
| DRIP | Dripshield for Rough Environments (610 - 1015 models) |
| RACK-PLATE | 19" Rackmount Plate (310 & 1503 models) |
| PORTABLE | Portable Features (Carrying Handle, Alligator clips) |
| 3 BANK | Option Available |
| FC | Fuel Cell Modification for BCD |
| LVIN | Low Voltage Input: 12V add-in (BCD315, 615, 1015) |
| CUSTOM | Input Voltages (Available Upon Request) |
| CUSTOM | Battery Voltages (Available Upon Request) |






















