BCD610R Isolated Battery Charger(Ractifier)

Benefits

Ultra-Quiet
Power sensitive electronics without interference
Rugged & Reliable
Ensure years of safe and trouble free operation
Fast & Accurate Charging

The model BCD610R Rackmount DC Battery Charger charges either 12V, 24V or 48V batteries from a 110, 220 or 300VDC power source. Other battery voltages up to 360 volts are also available by special order.

The all-new Current Mode switching design offers increased power and reliability in a compact package. Extra input and output filtering reduce EMI to extremely low levels. Reliability features include an input fuse, thermal shutdown, current limiting, reverse battery hookup protection, output short circuit shutdown with automatic recovery, and equalize charging cycle. The output voltage is easily adjusted 1.0 volts above or below the standard output voltage to accommodate special charging requirements.

A high quality Digital Volt/Ammeter allows the monitoring of charging current and charging voltage. We are confident that you will get many years of reliable service from this DC Battery Charger.

Features

Fully Isolated Design
Adjustable output voltage for charging standard or deep cycle lead-acid, VRLA or Gel cell type battery
Extremely rugged and well suited for marine and other demanding environments
High tolerance for shock and vibration
Ultra-quiet low EMI operation
Can be left permanently connected
Spark free connection
User selectable 2 or 3 stage charging profile
Audible & visual indicators for output overload, low input voltage, low output voltage & over-temperature
Over-temperature shutdown
Short circuit protection
Output over-voltage crowbar
Inrush Current Limiting with solid state bypass
Dry contact output fail relay
3 year parts and labour warranty

Applications

Marine & other Rugged Environments
Electric Utilities and Substations
Manufacturing Plants
Steel Mills
Military Applications (COTS)
Industrial Controls
OEM Applications
Solar / Alternative Power Systems
Fuel Cells
Charge any DC/DC System

Electrical [Input]
Nominal Vac (ip)	110	250	300
Actual (Vdc)	100-140	230-280	280-360
Input Amps (Max)	8.2	3.6	2.9
Input Fuse (MDA)	10	4	3
Noise on Input	< 50mV

Electrical [Output]
Output Nominal (op)	12	24	48
Output Volts (DC)	13.6 ± 0.05	27.2 ± 0.05	54.4 ± 0.05
Absorption Voltage (Vdc)	14.4	28.8	57.6
Charging Amps	40	22	11
Absorption to Float(15%)	6.0Amps	3.3Amps	1.65Amps
Output Adjustment(Vdc)	± 1.0V
Output Fuses(AGC)	20Amp x4	30Amp x2	15Amp x2
Battery Banks	1 or 2 (Optional 3-bank)
Battery Size (Amp Hrs.)	160-240	88-132	44-66
Output Crowbar	16.0 ± 0.5V	32.0 ± 1.0V	63.9 ± 2.0V
Output Ripple & Noise	< 50 mV
Regulation (Line & Load)	< +/- 0.5%
Temperature Comp.	-30 mV/°C	-60 mV/°C	-120 mV/°C
Duty Cycle	Continuous 100% for 24 hours per day
Efficiency	> 75% @ Maximum Output
Stages	2 or 3 (user selectable)

Environmental Specification
Operating Temp. Range	-25° to +40°C @ maximum output Derate Linearly 2.5% per°C from 40°C (Optional -40°C extra wide temp. operation avail.)
Humidity	0 - 95°C Relative Humidity (non-condensing) with optional conformal coating
Audible Noise	NONE - Ødb @ 3 ft
Typical Service Life	>10 years (87,600 hours)
Isolation	Input-Case & input-output 1500VDC Output - Case 500VDC(1500VDC @ 48V Output)

Mechanical Specification
Depth	13.5 in/ 34.3 cm
Width	19.0 in/ 48.3 cm
Height	2u(3.5 in)/ 8.9 cm
Clearance	1 inch (2.5 cm) all around
Material	Marine Grade Aluminium
Finish	Black Anodize / Powder Epoxy Coat
Fastenings	All 18-8 Stainless Steel
Weight	7.6 lb / 3.3 kg
Connections	Four contact output terminals
Warranty	3 years
Safety	Approval to cETLus Standards Pending

Product Guide

Impact Movie