Computers are moving into non-traditional work areas at an ever increasing rate as more and more specialty software packages become available. However there is a major problem. Computers require clean, pure AC power to work reliably. If you power one from the same Genset that runs your heavy loads, you could damage it from surges and spikes generated by switching those loads.

If you power it from the same Inverter that runs a microwave and other electrical devices, similar problems occur, plus voltage dropouts from excessive loads on the inverter add to the problem. Also, most inverters produce 'Quasi-Sine Wave' AC, which often doesn't run computers very well. Complaints of noisy displays, cursors that move by themselves and more abound.

One standard AC receptacle provides for easy connection. Versions are available to operate from 12V, 24V or 32 Volt battery systems. The IPS600 series of inverters carry a full three-year warranty.

Features

• Pure Sine Wave - 120 VAC / 60 Hz fully regulated output, exactly the same as household AC
• Ultra-quiet, low EMI design
• Extra heavy input filtering to eliminate interference with other equipment sharing the same batteries
• Crystal controlled for precise frequency (± 0.01 Hz)
• State-of-the-art MosFet technology and unique "Soft-Start" circuitry for reliable operation
• Short Circuit Protection
• Current Limiting
• Overload Protection
• Illuminated ON-OFF switch for positive indication of proper operation
• Built to the Q-Base Quality System Standard
• Over-temperature protection
• Low voltage warning and shutdown circuitry to protect the batteries
• Transformer type output to protect computers and other sensitive equipment from surges and spikes
• Over voltage and over temperature warning and shutdown circuitry to protect the inverter
• Thermostatically controlled fan
• One AC receptacles for easy connection of up to four devices (Various Mil Connectors Available as options)
• Isolated input for positive or negative ground operation
• Diagnostic LEDs and Audible Alarms

Military Option

Most of the products manufactured by Analytic Systems can be adapted for military use (Commercial Off The Shelf).




We provide four different levels of ruggedization; most often, a product in military use will use the extra-wide temperature range components to allow operation to -55 degrees Celsius.




The printed circuit boards are also protected against condensation and are enhanced with vibration protection that meets or exceeds MIL-STD810F, Method 514-3 and Cat-1 Proc 1. C.O.T.S. products are designed to meet water tightness, and various levels of EMC radiated and conducted emissions MIL-STD 461E.




All C.O.T.S. products are manufactured in accordance with IPC-A-610.