LIAC600-28 LI-ION Battery Charger
- Power sensitive electronics without interference
- Rugged & Reliable
- Ensure years of safe and trouble free operation
- Fast & Accurate Charging
- Download Data Sheet
This COTS Charger is designed for recharging the SAFT Lithium-Ion Battery (LBB) used by the US Armed Forces and is controlled using industry standard interface circuitry. It can also be used in Bypass Mode as a Stand-Alone power supply. It is designed to deliver 32.0 VDC at up to 22 amps continuous to recharge the battery. The output charges to 28 VDC at up to 22 amps when operating in Bypass Mode.
The LIAC600-28 can be powered from either 110 or 220 VAC (Auto Switching) at frequencies from 45 to 405 Hz. The unit is tested to MIL461E for both radiated and conducted emissions. It is compliant with MIL810F for shock and vibration and is designed to withstand submersion in 50cm of water for up to 5 minutes.
The unit can be operated over a temperature range of -40 to +60 degrees Celsius, and with an optional pre-heater, will operate at temperatures down to -55 degrees C.
Available options include a carrying handle and various Mil-Spec Connectors. We are confident that you will get many years of reliable service from this AC Battery Charger.
- Built as a COTS Battery Charger for Military Applications
- Military-Grade extrusion ensures a high tolerance for shock and vibration
- Ultra-quiet, low EMI operation
- Can be left permanently connected
- Can function as a power supply
- Optional Carrying Handle available
- Visual indicators for output and charging
- Short circuit protection
- Output over-voltage crowbar
- Inrush Current Limiting with solid state bypass
- 110/220 Vac input auto switch circuitry
- 3 year parts and labour warranty (2 yr. Extension available)
- Designed to meet MIL-STD 810F, Method 514-3, Cat-I Proc I for vibration
- Built according to the Q-Base Quality System
Most of the products manufactured by Analytic Systems can be adapted for military use (Commercial Off The Shelf).
We provide four different levels of ruggedization; most often, a product in military use will use the extra-wide temperature range components to allow operation to -55 degrees Celsius.
The printed circuit boards are also protected against condensation and are enhanced with vibration protection that meets or exceeds MIL-STD810F, Method 514-3 and Cat-1 Proc 1.
C.O.T.S. products are designed to meet EMC radiated and conducted emissions MIL-STD 461E.
All C.O.T.S. products are manufactured in accordance with IPC-A-610.
|Nominal Vac (ip)||110 / 220 (Autoranging)|
|Input Amps (Max)||10.5||5.3|
|Input Circuit Breaker||10A Magnetic|
|Input Frequency||45-405 Hz|
|Noise on Input||< 50 mV|
|32.0 -0.05/+0.00 VDC|
|28.0 +/- 0.05 VDC|
|Charging Amps||22A Continuous|
|Output Ripple & Noise||< 260mV p-p @ 20A Load|
(Line & Load)
|< +/- 1.0% or 260mV, max.|
|Stages||2 (Float and bypass)|
|Efficiency||> 75% @ Maximum Output|
|Hold-Up Time||20msec., min. @ 24 Amps|
|Dynamic Response||1 sec., max.|
|Temperature Coefficient||0.02%/°C, max.|
|Over-Voltage Protection||32.25 VDC Latching|
|Duty Cycle||Continuous 100% for 24 hours per day|
|Battery Load when OFF||25 milli-amps Max|
|EMC||Designed to meet MIL461E|
|Visual Indicators||Input On, Input Undervolt, Output Undervolt, & Overheat|
|Operating Temp. Range||-40° to +50°C @ maximum output
Derate Linearly 2.5% per°C from 50°C to 85°C
(Optional pre-heater to allow -55°C operation available)
|Humidity||0 - 95°C Relative Humidity
(non-condensing) with optional conformal coating
|Audible Noise||NONE Ødb @ 3 ft|
|Typical Service Life||>10 years (87,600 hours)|
|Isolation||Case & Input-Output 1500VDC / Output-Case 500VDC|
|Length||17.0 in/ 43.2 cm|
|Width||8.2 in/ 20.8 cm|
|Height||3.5 in/ 8.9 cm (Without carrying handle)|
|Clearance||1 inch (2.5 cm) all around|
|Material||Marine Grade Aluminium– rainproof|
|Fastenings||All 18-8 Stainless Steel|
|Weight||14.4 lb / 6.6 kg|
|Connections||Cannon Connectors Shown (Other custom MIL-Spec Connectors also available)|
Toll Free: 1-800-668-3884